 |
| Quantity: | |
|---|---|
ISB 800AN-3
JASU
Higher output rates.
Nearly no srcap rate.
Conveying preforms automatically with conveyor.
Stable performance with advanced PC.
Can use recycling material and combined with the optimized and improved procedures, it achieves the best efficiency and cost.
Without the need to outsource preforms or for additional capital investment in injection machinery purchase, the single-stage process provides advantages of lower operational cost and occupies less floor space (No need for preform storage).
Equipment parameters and process are set by HMI for living supervising of the equipment operation and its matching up with the panel switches and buttons, enables convenient, direct and highly efficient operation of the whole system.
Fully automatic control, easy to operate; realize no human hand contact in the production process of the product, to ensure that the product is clean and hygienic.
Data Sheet of JASU Injection Stretch Blow Moulding Machine (ISBM) / Semi Automatic PET Blowing Machine
| Item | Unit | Machine Type | ||
| ISB 800AN-3 | ||||
| Injection Part | Screw Diameter | mm | 50 | |
| Screw L/D Ratio | L/D | 20.5:1 | ||
| Screw Speed | r/min | 0-150 | ||
| Theoretical Injection Capacity | cm3 | 481 | ||
| Injection Pressure | MPa | 176 | ||
| Max. Hydraulic Pressure | Kg/cm | 140 | ||
| The Actual Injection Quantity | g(ps) | 452 | ||
| Oz | 16 | |||
| Screw Stroke | mm | 245 | ||
| Clamping Part | Blow Clamping Force | KN | 80 | |
| Clamp Tonnage | KN | 400 | ||
| Wheel Diameter | mm | 800 | ||
| Max. Height | PP, PET, PETG, Tritan, PS, PC | mm | 200 | |
| PC, PETG, Tritan, PS | mm | 220 | ||
| Open Vertical Mode Trip | mm | 570 | ||
| Others | Max. Pump Pressure | MPa | 16 | |
| Servo Motor | Kw | 22 | ||
| Mode Opening/Locking Motor (Double Pump) | Kw | 22 | ||
| Electric Power | Kw | 12.2 | ||
| Tank Volume | L | 420 | ||
| Dimension of Machine | m | 4.2*1.75*3.4 | ||
| Machine Weight | T | 6 | ||
| --Parameters are subject to change without prior notice. --Providing PC, PET, PP, PS, PETG, TRITAN screw barrels according to customers' requirements. | ||||
Semi automatic PET blowing machine by injection stretch blow moulding process is widely used for various plastic materials and has broad application prospects
Treatable Bottle Capacity: 5-2500ml
Shapes: cylinder, jar, oblong, square, plain round, wide-mouth, oval, non-round, ultra-light etc.
Resins Appliable: thermoplastic material (such as PET,PC,TRITAN/BPA Free,PS,PETG, PA etc)
Why JASU Precision Machinery?
We are THE FIRST to manufacture One Stage Injection Stretch Blow Molding Machine in China on basis of digestion and absorption of the advanced technology from Japan and Germany.
Manufacturer/Direct Factory with production base takes 24000m2.
Own highly qualified technical staffs (20-30 persons) and R/D center.
Obtained a number of technical patents.
Market network throughout the country , and export to many countries of East Europe, South America, South Africa etc.
Our machine enjoyed high reputation among customers.
Overseas sales increase 33% annually.
Service technicians (holding visa and passport) are on call and able to serve on site and instruct via voice and videos.
Higher output rates.
Nearly no srcap rate.
Conveying preforms automatically with conveyor.
Stable performance with advanced PC.
Can use recycling material and combined with the optimized and improved procedures, it achieves the best efficiency and cost.
Without the need to outsource preforms or for additional capital investment in injection machinery purchase, the single-stage process provides advantages of lower operational cost and occupies less floor space (No need for preform storage).
Equipment parameters and process are set by HMI for living supervising of the equipment operation and its matching up with the panel switches and buttons, enables convenient, direct and highly efficient operation of the whole system.
Fully automatic control, easy to operate; realize no human hand contact in the production process of the product, to ensure that the product is clean and hygienic.
Data Sheet of JASU Injection Stretch Blow Moulding Machine (ISBM) / Semi Automatic PET Blowing Machine
| Item | Unit | Machine Type | ||
| ISB 800AN-3 | ||||
| Injection Part | Screw Diameter | mm | 50 | |
| Screw L/D Ratio | L/D | 20.5:1 | ||
| Screw Speed | r/min | 0-150 | ||
| Theoretical Injection Capacity | cm3 | 481 | ||
| Injection Pressure | MPa | 176 | ||
| Max. Hydraulic Pressure | Kg/cm | 140 | ||
| The Actual Injection Quantity | g(ps) | 452 | ||
| Oz | 16 | |||
| Screw Stroke | mm | 245 | ||
| Clamping Part | Blow Clamping Force | KN | 80 | |
| Clamp Tonnage | KN | 400 | ||
| Wheel Diameter | mm | 800 | ||
| Max. Height | PP, PET, PETG, Tritan, PS, PC | mm | 200 | |
| PC, PETG, Tritan, PS | mm | 220 | ||
| Open Vertical Mode Trip | mm | 570 | ||
| Others | Max. Pump Pressure | MPa | 16 | |
| Servo Motor | Kw | 22 | ||
| Mode Opening/Locking Motor (Double Pump) | Kw | 22 | ||
| Electric Power | Kw | 12.2 | ||
| Tank Volume | L | 420 | ||
| Dimension of Machine | m | 4.2*1.75*3.4 | ||
| Machine Weight | T | 6 | ||
| --Parameters are subject to change without prior notice. --Providing PC, PET, PP, PS, PETG, TRITAN screw barrels according to customers' requirements. | ||||
Semi automatic PET blowing machine by injection stretch blow moulding process is widely used for various plastic materials and has broad application prospects
Treatable Bottle Capacity: 5-2500ml
Shapes: cylinder, jar, oblong, square, plain round, wide-mouth, oval, non-round, ultra-light etc.
Resins Appliable: thermoplastic material (such as PET,PC,TRITAN/BPA Free,PS,PETG, PA etc)
Why JASU Precision Machinery?
We are THE FIRST to manufacture One Stage Injection Stretch Blow Molding Machine in China on basis of digestion and absorption of the advanced technology from Japan and Germany.
Manufacturer/Direct Factory with production base takes 24000m2.
Own highly qualified technical staffs (20-30 persons) and R/D center.
Obtained a number of technical patents.
Market network throughout the country , and export to many countries of East Europe, South America, South Africa etc.
Our machine enjoyed high reputation among customers.
Overseas sales increase 33% annually.
Service technicians (holding visa and passport) are on call and able to serve on site and instruct via voice and videos.
