English
简体中文
Français
Pусский
Español
Português

You are here: Home » Application » Food Cans

Food Cans

Publish Time: 2022-03-13     Origin: Site

Jasu Automatic Pet PC Food Candy Jar Cans Container Injection Blow Molding Machine / plastic Jar Bottle Blowing Machine


  Benefits of One Step Injection Stretch Blow Molding Machine (ISBM machine)  

  • Nearly no scrap rate.

  • Guaranteed hygienic requirement.

  • Fixed orientation: ISBM machine could make bottles with the same orientation of screw, which could make the closures (screw cap, flip caps, pump, etc.) pointing in the same direction.

  • Shaping ability: the preform remains warm during the process, which could present a better shaping ability, a sharper angle. Most beneficial bottling line.

  • Less energy consumption while high output rates.

  • Scrapless process meaning no flash to trim and no regrind.

  • High utilization of raw material, high yield, high rate of return on investment.

  • Does not require separate preform mold and machine.

  • Cut transferring cost of reforms/bottles.


  Wokring Process of Injection Stretch Blow Molding Machine  

  • Workplace 1 THE FIRST SERVICE POSITION

The plastic melt is injected into the parison under low injection pressure, and the neck of the bottle is precisely shaped. After proper control, the mold is opened and the mandrel and parison are transferred to.


  • Workplace 2 THE SECOND SERVICE POSITION

Blow molding is completed in this cavity by cooling and forming station. (The mold cavity determines the shape and appearance of the bottle). The parison is inflated by the air coming out of the mandrel and close to the mold. Then, the mold is opened and the mandrel and the parison are transferred together.



  • Workplace 3 THE THIRD SERVICE POSITION

Demoulding is completed at this station, and then packaging or filling is carried out through the assembly line. The three actions of injection, blow molding and demoulding are carried out at the same time, which is highly efficient and energy-saving.


  Application of one -step injection stretch blow molding machine ISBM Machine  

A large range of refined and essential designed platic blow molded bottles and jars are available from size 10ml to 2500ml.

Shapes: cylinder, jar, oblong, square, plain round, wide-mouth, oval, non-round, ultra-light etc.

Wide mouthed jars for a variety of food and non-food applications, Cosmetics Packaging: mascara, lotion, cream etc. Pharmaceuticals: eye drops, medicine bottle, pills, oral liquid, intravenous drip bottles etc. Baby Feeding Bottles, Spice, Liquor, Carbonated Drink, Beverage Bottles etc.


Copyright © 2022 Guangzhou JASU Precision Machinery Co., Ltd. All Rights Reserved. Sitemap | Support By Leadong