 |
| Quantity: | |
|---|---|
ISB 800AN-3
JASU
Why One-Step PET Injection Stretch Blow molding machine / Single Stage ISBM Machines
Bottle screw size of neck and bottle parting line are perfect, bottle is stronger.
Adopt biaxial stretch blow moulding, in which the stretching is done in both longitudinal and transverse direction.
Biaxial orientation increases the tensile strength, gas barrier properties, drop impact strength and clarity of plastics.
Scrapless process meaning no flash to trim and no regrind
Stable performance with advanced PC
Conveying preforms automatically with conveyor
No contamination and low noise with the air cylinder to drive the action instead of the oil pump
Machine with a built-in error detection and alarm system, and display in the manipulation of the screen
Equipment parameters and process are set by HMI for living supervising of the equipment operation and its matching up with the panel switches and buttons, enables convenient, direct and highly efficient operation of the whole system
Data Sheet of JASU Injection Stretch Blow Moulding Machine (ISBM) / PET Molding Machine
| Item | Unit | Machine Type | ||
| ISB 800AN-3 | ||||
| Injection Part | Screw Diameter | mm | 50 | |
| Screw L/D Ratio | L/D | 20.5:1 | ||
| Screw Speed | r/min | 0-150 | ||
| Theoretical Injection Capacity | cm3 | 481 | ||
| Injection Pressure | MPa | 176 | ||
| Max. Hydraulic Pressure | Kg/cm | 140 | ||
| The Actual Injection Quantity | g(ps) | 452 | ||
| Oz | 16 | |||
| Screw Stroke | mm | 245 | ||
| Clamping Part | Blow Clamping Force | KN | 80 | |
| Clamp Tonnage | KN | 400 | ||
| Wheel Diameter | mm | 800 | ||
| Max. Height | PP, PET, PETG, Tritan, PS, PC | mm | 200 | |
| PC, PETG, Tritan, PS | mm | 220 | ||
| Open Vertical Mode Trip | mm | 570 | ||
| Others | Max. Pump Pressure | MPa | 16 | |
| Servo Motor | Kw | 22 | ||
| Mode Opening/Locking Motor (Double Pump) | Kw | 22 | ||
| Electric Power | Kw | 12.2 | ||
| Tank Volume | L | 420 | ||
| Dimension of Machine | m | 4.2*1.75*3.4 | ||
| Machine Weight | T | 6 | ||
| --Parameters are subject to change without prior notice. --Providing PC, PET, PP, PS, PETG, TRITAN screw barrels according to customers' requirements. | ||||
PET Molding Machine is widely used for various plastic materials and has broad application prospects
A large range of refined and essential designed plastic blow molded bottles and jars are available from size 5ml to 2500ml.
Injection blowing molding machine is suitable for PET, High transparent PP, PCTG, PETG, SAN, PC, PMMA, PS, Tritan (BPA Free)
PET stretch blow molding machines is used for producing various range of bottles that have numerous applications in different industries such as food & beverages, pharmaceuticals, personal care & cosmetics and many more.
Why One-Step PET Injection Stretch Blow molding machine / Single Stage ISBM Machines
Bottle screw size of neck and bottle parting line are perfect, bottle is stronger.
Adopt biaxial stretch blow moulding, in which the stretching is done in both longitudinal and transverse direction.
Biaxial orientation increases the tensile strength, gas barrier properties, drop impact strength and clarity of plastics.
Scrapless process meaning no flash to trim and no regrind
Stable performance with advanced PC
Conveying preforms automatically with conveyor
No contamination and low noise with the air cylinder to drive the action instead of the oil pump
Machine with a built-in error detection and alarm system, and display in the manipulation of the screen
Equipment parameters and process are set by HMI for living supervising of the equipment operation and its matching up with the panel switches and buttons, enables convenient, direct and highly efficient operation of the whole system
Data Sheet of JASU Injection Stretch Blow Moulding Machine (ISBM) / PET Molding Machine
| Item | Unit | Machine Type | ||
| ISB 800AN-3 | ||||
| Injection Part | Screw Diameter | mm | 50 | |
| Screw L/D Ratio | L/D | 20.5:1 | ||
| Screw Speed | r/min | 0-150 | ||
| Theoretical Injection Capacity | cm3 | 481 | ||
| Injection Pressure | MPa | 176 | ||
| Max. Hydraulic Pressure | Kg/cm | 140 | ||
| The Actual Injection Quantity | g(ps) | 452 | ||
| Oz | 16 | |||
| Screw Stroke | mm | 245 | ||
| Clamping Part | Blow Clamping Force | KN | 80 | |
| Clamp Tonnage | KN | 400 | ||
| Wheel Diameter | mm | 800 | ||
| Max. Height | PP, PET, PETG, Tritan, PS, PC | mm | 200 | |
| PC, PETG, Tritan, PS | mm | 220 | ||
| Open Vertical Mode Trip | mm | 570 | ||
| Others | Max. Pump Pressure | MPa | 16 | |
| Servo Motor | Kw | 22 | ||
| Mode Opening/Locking Motor (Double Pump) | Kw | 22 | ||
| Electric Power | Kw | 12.2 | ||
| Tank Volume | L | 420 | ||
| Dimension of Machine | m | 4.2*1.75*3.4 | ||
| Machine Weight | T | 6 | ||
| --Parameters are subject to change without prior notice. --Providing PC, PET, PP, PS, PETG, TRITAN screw barrels according to customers' requirements. | ||||
PET Molding Machine is widely used for various plastic materials and has broad application prospects
A large range of refined and essential designed plastic blow molded bottles and jars are available from size 5ml to 2500ml.
Injection blowing molding machine is suitable for PET, High transparent PP, PCTG, PETG, SAN, PC, PMMA, PS, Tritan (BPA Free)
PET stretch blow molding machines is used for producing various range of bottles that have numerous applications in different industries such as food & beverages, pharmaceuticals, personal care & cosmetics and many more.
